Presented and Published Papers
1. Che Husna Azhari, Zamri Yusoff and Jaafar Sahari (1992). Preliminary Studies on the Morphology of Natural Rubber Polypropylene Blends using Scanning Electron Microscopy. Jurnal kejuruteraan (4), pp. 25-34. ISSN0128-0198 (http://myais.fsktm.um.edu.my/view/people/zamri_yusoff,_,html)
2. Zamri Yusoff, Shamsul baharin Jamaludin and Khairel Rafezi Ahmad (2006). Comparative Study of the Corrosion Behaviour of AA2014/15 vol. % Al2O3p and AA2009/20 vol. % SiCw After Artificial Ageing. KUKUM Engineering Research Seminar 2006. pp. 195-210. ISBN 978-983-42371-1-0.
3. Y. B. Zamri, J. B. Shamsul and K. R. Ahmad (2006). The Use of SEM and XRD to Evaluates the microstructure and Corrosion Porducts in AA2014/15 vol. % Al2O3p and AA2009/20 vol. % SiCw. In proceeding of The 15th Scientific Conference in Collaboration with 16th Annual General Meeting of Electron Microscopy Society of Malaysia. P.S. 2b4- ISBN-983-2888-41-7.
4. Zamri Yusoff, Shamsul baharin Jamaludin and Khairel Rafezi Ahmad (2006). Characterization of the Electrochemical Event at Corrosion Site on MMCs by XRD and EDS. In Proceeding of International Conference on X-Rays and Related Technologies in Research and Industry. ISBN-983-3391-90-7.
5. Y. B. Zamri, J. B. Shamsul and K. R. Ahmad (2006). Hardness and Resistivity Studies of AMCs after Artificial Ageing. In proceeding of National Metallurgy Conference 2006. pp. 126-127.
6. Y. B. Zamri, J. B. Shamsul and K. R. Ahmad (2006). Corrosion Behaviour of AA2014/15 vol. % Al2O3p and AA2009/20 vol. % SiCw in Salt Spray Test. In proceeding of National Metallurgy Conference 2006. pp. 123-125.
7. Y. B. Zamri, J. B. Shamsul and K. R. Ahmad (2006). Overview of Processing, Properties and Application on Aluminium Matrix Composites. In proceeding of National Metallurgy Conference 2006. pp. 130-131.
8. Y. B. Zamri, J. B. Shamsul and K. R. Ahmad (2006). Corrosion of Aluminium Matrix Compsites. In proceeding of National Metallurgy Conference 2006. pp. 128-129.
9. Zamri Yusoff, Shamsul baharin Jamaludin and Khairel Rafezi Ahmad (2006). The Effects of Ageing Condition on the Microstructure and Hardness of Al2009/SiCw and Al2014/Al2O3p. In Journal of Solid State Science and Technology Letters, vol. 13. No. 2 (suppl.) 2006. pp.165.
10. S. B. Jamaludin, Z. Yusoff, K.R. Ahmad (2008). Comparative study of corrosion of AA2014/15 vol% Al2O3p and AA2009/20 vol% SiCw. Portugaliae Electrochimica Acta, vol. 26, pp. 291-301.
11. Zamri Yusoff, Mohamad Ruslan Zai, Mohd Aiman, Mohd Syaiful, Mohd Syamil and Mohamad Khairul Rizuan (2009). PTSS Testing Equipment Status Analysis at Mecahnical Engineering Department for Fundamental Research Works of Material Engineering Field, in proceeding of Seminar Penyelidikan Pendidikan Zon 1, POLIMAS. pp. 105-111.
12. Zamri Yusoff, Shamsul baharin Jamaludin and Khairel Rafezi Ahmad (2009), Microstructure Evaluation on an Al2009 Reinforced with SiC whiskers and Al 2014 Reinforced with Al2O3p particles. PTSS Digest. pp. 45-62. ISSN 2180-2173.
13. Zamri Yusoff, Shamsul baharin Jamaludin and Khairel Rafezi Ahmad (2009), The Use of SEM and XRD to Evaluate the microstructure and Corrosion Porducts in AA2014/15 vol. % Al2O3p and AA2009/20 vol. % SiCw. PTSS Digest. pp. 63-72. ISSN 2180-2173.
14. Zamri Yusoff, Shamsul baharin Jamaludin and Misbahul Amin (2009), A Feasibility Study on Palm Shell Activated carbon as a Reinforcement in a Aluminium Matrix Composite Fabricated via Conventional Powder Metallurgy. PTSS Digest. pp. 73-85. ISSN 2180-2173.
15. Zamri Yusoff, Shamsul baharin Jamaludin and Misbahul Amin (2010), Correlation and Contribution of Synergic Factors on Abrasive Wear Behaviour of Slag/Aluminium Composite using Statistical analysis. In the proceeding of The 1st Regional Conference on Applied and Engineering Mathematics 2010, Lim Eng Aik, Qamar Nasir Usmani and Muhamad Nasaruddin (Eds.). Vol. 1, No. 28, pp. 168-171.
16. Zamri Yusoff, Shamsul baharin Jamaludin and Misbahul Amin (2010), A Developing a Mathematical Model to Evaluate Wear Coefficient of Aluminium/Slag Powder Metallurgy Composites. In the proceeding of The 1st Regional Conference on Applied and Engineering Mathematics 2010, Lim Eng Aik, Qamar Nasir Usmani and Muhamad Nasaruddin (Eds.). Vol. 4, No. 12, pp. 413-418.
17. Zamri Yusoff, Shamsul baharin Jamaludin and Misbahul Amin (2010), Two-body Abrasive Wear of Slag Reinforced Aluminium Matrix Composites, in proceedings of Malaysian Technical Universities Conference on Engineering and Technology 2010. pp. 163-166. ISBN 978-983-2948-77-3.
18. Zamri Yusoff and Shamsul baharin Jamaludin (2010), An Examination Of The Evidence Of Wear In The Wearing Process Of Aluminium Reinforced With Slag Particles Using SEM, in proceedings of International Postgraduate Conference on Engineering (IPCE) 2010.
19. Zamri Yusoff and Baharin Jamaludin (2010), Tribology and Wear Theory of Aluminium Composites:Review and Discussion, in proceedings of International Postgraduate Conference on Engineering (IPCE) 2010.
20. Zamri Yusoff, Shamsul Baharin Jamaludin, Misbahul Amin, and Nur Hidayah Ahmad Zaidi (2010), Sliding Wear Properties of Hybrid Aluminium Composite Reinforced By Particles of Palm Shell Activated Carbon and Slag, in Journal of Science and Technology, UTHM. Volume 2, No. 1, August 2010, pp. 79-96. ISSN: 1985-8809
21. Zamri Yusoff and Shamsul Baharin Jamaludin (2011), Tribology and Development of Wear Theory: Review and Discussion, in International Journal of Current Research and Review, Vol. 03, Issue 02, Feb 2011. pp 13-26. ISSN: 0975-5241
22. Zamri Yusoff and Shamsul Baharin Jamaludin (2011), Wear Behaviour of Palm Shell Activated Carbon and Slag Reinforced Aluminium Matrix Composite Fabricated Via Conventional Powder Metallurgy, in proceeding of 1st Sustainable Engineering Research Colloquium (SERC):Structural Materials Group and Electronic Materials Group.
23. Y. B. Zamri, J. B. Shamsul, M. M. Amin ( 2011). Potential of Palm Oil Clinker as Reinforcement in Aluminium Matrix Composite for Tribological Application. SInternational Journal of Mechanical and Materials Engineering (ISSN 1823-0334) Indexed by Scopus,6, No 1
24. Y. Zamri, J. B. Shamsul (2011). Physical properties and wear behaviour of aluminium matrix composite reinforced with palm shell activated carbon (PSAC). Kovove Mater., 49, pp. 1-9.http://www.kovmat.sav.sk/abstract.php?rr=49&cc=4&ss=287
25. Zamri Yusoff (2010). An overview of the wear behaviour of SiC-reinforced and Al2O3 reinforced aluminium matrix composite: A comparative study. PTSS Digest 2010. pp. 119-131. ISSN 2180-2173.
26. Zamri Yusoff (2010). The roles of graphite in controlling wear behaviour of graphite reinforced aluminium composite and hybrid composite: An overview. PTSS Digest 2010. pp. 132-143. ISSN 2180-2173.
27. Y. Zamri and J. B. Shamsul (2011). Analysis of worn surfaces of palm shell activated carbon (PSAC) reinforced aluminium matrix composite. Engineering e-Transaction. Vol. 6, No.2, pp.164-168. ISSN 1823-6379.
28. Zamri Yusoff and Shamsul Baharin Jamaludin (2011). The influence of particle size and compaction pressure on surface hardness of aluminium composite fabricated via powder metallurgy. Australian Journal of Basic and Applied Sciences. Vol.5, issue 11, pp. 133-140.
29. Zamri Yusoff and Shamsul Baharin Jamaludin (2011). Analysis of worn surfaces of palm shell activated carbon (PSAC) reinforced aluminium matrix composite. in proceeding of Regional Tribology Conference, Bayview Hotel langkawi Island, Malaysia. Edited by M.A Maleque and A.A. Adebisi. pp. 252-257. ISBN 978-967-5878-47-3
30. Zamri Yusoff (2011). Fabrication and Characterization of Aluminium matrix Composite via Conventional Powder Metallurgy. RnD DoMe, Politeknik Kota Bharu, Kelantan. Vol. 1, No. 2, pp. 80-87. ISSN 2180-2238.
31. Zamri Yusoff (2012). The Physical and Wear properties of Hybrid Biomass By-product Particulates Reinforced Aluminium matrix composite. 8th International Conference on Marine Technology (MARTEC2012), Universiti Malaysia Terengganu. pp. 72.
32. Z. Yusoff, S. B. Jamaludin and M. Mohd Noor (2012). Physical Properties and Microstructures of Green Aluminium Matrix Composite. The 8th Asian-Australian Conference on Composite Materials (ACCM8), Kuala Lumpur Convention Centre, Malaysia. pp. 225.
33. M. N. Mazlee, J. B. Shamsul and Y. Zamri (2012). Fabrication and Dynamic Mechanical Properties of A357-Stainless Steel Composites.The 8th Asian-Australian Conference on Composite Materials (ACCM8), Kuala Lumpur Convention Centre, Malaysia. pp. 305.
32. Z. Yusoff, S. B. Jamaludin and M. Mohd Noor (2012). Physical Properties and Microstructures of Green Aluminium Matrix Composite. The 8th Asian-Australian Conference on Composite Materials (ACCM8), Kuala Lumpur Convention Centre, Malaysia. pp. 225.
33. M. N. Mazlee, J. B. Shamsul and Y. Zamri (2012). Fabrication and Dynamic Mechanical Properties of A357-Stainless Steel Composites.The 8th Asian-Australian Conference on Composite Materials (ACCM8), Kuala Lumpur Convention Centre, Malaysia. pp. 305.
