CURRICULUM VITAE-ZAMRI YUSOFF

DEPARTMENT OF MECHANICAL ENGINEERING
POLITEKNIK KOTA BHARU, KELANTAN.

NAME : ZAMRI BIN YUSOFF

IC NO : 640302-03-5619  

DESIGNATION : LECTURER PPPT DH48        

CONTACT DETAILS

Address                        : Jabatan Kejuruteraan Mekanikal,                                          Politeknik Kota Bharu, Km 24 Kok Lanas, 16450 Ketereh, Kelantan Telephone No.               : 09-7889126/344/641 ext 196 Mobile No.                    : 012-6057182 Email                            : zamriyusoff@pkb.edu.my

PERSONAL PARTICULARS

Date of Birth                 :  02.03.1964 Nationality                     :  Malaysian Marital Status                :  Married Permanent Residence    :  Lot 35, Bel. Sek. Keb. Kubang Golok, Perupok,  16300 Bachok, Kelantan.

ACADEMIC QUALIFICATIONS

Qualification                  :  Doctor of Philosophy (PhD) Field of Study               :  Material Engineering Major                            :  Metal Matrix Composite/Powder Metallurgy/Wear Behaviour Institute/University         :  Universiti Malaysia Perlis Graduation Date            :  2012   Qualification                  :  Master of Science (M.Sc) Field of Study               :  Material Engineering Major                            :  Metal matrix Composite/Corrosion Institute/University         :  Universiti Malaysia Perlis Graduation Date            :  2007     Qualification                  :  Bachelor of Mechanical Engineering [B. Mech. Eng.(Hons.)] Field of Study               :  Mechanical Major                            :  Pure Mechanical Institute/University         :  Universiti Teknologi Malaysia Graduation Date            :  1988   Qualification                  :  Diploma in Education Field of Study               :  Engineering Education Major                            :  Engineering education Institute/University         :  Universiti Teknologi Malaysia Graduation Date            :  1992     Qualification                  :  Diploma in Polymer Engineering Field of Study               :  Termoplastic/Termoset Major                            :  Polymer Proccessing Institute/University         :  Trowbridge College, United Kingdom. Graduation Date            :  1997     Qualification                  :  Certificate in Advanced Welding Field of Study               :  TIG and MIG Major                            :  Welding of Aluminium and Steel Institute/University         :  Universiti Kuala Lumpur (UniKL) Graduation Date            :  2005

WORK EXPERIENCE

Organisation Position Title Duration Work Description:   Universiti Kebangsaan Malaysia Research Asistant 1988-1991 Assist the researcher under IRPA research Grant on topic “Thermoplastic natural Rubber” Kota Bharu Polytechnic       Lecturer   1992 – 2004 Courses Taught Teknologi Logam dan Bahan   Kawalan   Bengkel Kejuruteraan   Programs   Sijil jentera Am Sijil teknologi Pembuatan   Tuanku Syed Sirajuddin Perlis Polytechnic   Student Affair Officer 2004- 2011   Planning, implemeting dan monitoring student affair activities suc as Dicipline of students, Student representatives, Minggu Suai Kenal, and personal affair of student as well as counselling and carrier.   Kota Bharu Polytechnic   Lecturer   2011 – present Courses Taught  :         -          Maintenance management -          Engineering Laboratory 3 -          Engineering Workshop 4    Programs – Diploma in Mechanical Engineering               Work Description:                 Academic Responsibilities:   As Mechanical Lecturer   (Mechanical Dept.)   ·         Responsible for overall tutorial and teaching methods for mechanical subject involved, prepared                 teaching method for each semester intake. ·         Reporting to the department leaders on status, outstanding works and others problem of student              face. ·         Prepare standard of teaching methods by following government and international standard. (ISO              standard) ·         Prepare report regarding workshop that include additional responsible. ·         Attended every course, training involved with engineering skilled. ·         Prepare a paper work for marking system/format for workshop @ Labs. ·         Planning, implemeting dan monitoring teaching and learning of all courses taught.        Producing, editing and reviewing teaching material.        Assessing students’ academic progress – tests, quizzes, assignments and final exam.        Academic Adviser – providing guidance and advice to students.     Non-academic Responsibilities;   Co-ordinator for research and development, inovation and final project. Committee board in Minggu Suai Kenal (MSKJun2011) Committee in Konvokesyen 2013 Co-ordinator for Research methdology Workshop JKM Co-ordinator for SPSS training Workshop 2013-Level 1 JKM Co-ordinator for publication at JKM Co-ordinator for research activities including application of fund from PRGS and FRGS at JKM Panel of Judge for conferences in PKB

SKILLS / STRENGTHS

Proficient in spoken and written Malay and English. Able to teach students in Mechanical and Material Engineering. Able to do research activity and writing technical report and journal. Able to conduct the Statistical Data Analysis by using SPSS Able to do supervison for master and PhD student

CONFERENCES AND TRAINING

REFER APPENDIX

RESEARCH & PUBLICATIONS

1. Che Husna Azhari, Zamri Yusoff and Jaafar Sahari (1992). Preliminary Studies on the Morphology of Natural Rubber Polypropylene Blends using Scanning Electron Microscopy. Jurnal kejuruteraan (4), pp. 25-34. ISSN0128-0198 (http://myais.fsktm.um.edu.my/view/people/zamri_yusoff,_,html)   2. Zamri Yusoff, Shamsul baharin Jamaludin and Khairel Rafezi Ahmad (2006). Comparative Study of the Corrosion Behaviour of AA2014/15 vol. % Al2O3p and AA2009/20 vol. % SiCw After Artificial Ageing. KUKUM Engineering Research Seminar 2006. pp. 195-210. ISBN 978-983-42371-1-0.   3. Y. B. Zamri, J. B. Shamsul and K. R. Ahmad (2006). The Use of SEM and XRD to Evaluates the microstructure and Corrosion Porducts in AA2014/15 vol. % Al2O3p and AA2009/20 vol. % SiCw. In proceeding of The 15th Scientific Conference in Collaboration with 16th Annual General Meeting of Electron Microscopy Society of Malaysia. P.S. 2b4- ISBN-983-2888-41-7.   4. Zamri Yusoff, Shamsul baharin Jamaludin and Khairel Rafezi Ahmad (2006). Characterization of the Electrochemical Event at Corrosion Site on MMCs by XRD and EDS. In Proceeding of International Conference on X-Rays and Related Technologies in Research and Industry. ISBN-983-3391-90-7.   5. Y. B. Zamri, J. B. Shamsul and K. R. Ahmad (2006). Hardness and Resistivity Studies of AMCs after Artificial Ageing. In proceeding of National Metallurgy Conference 2006. pp. 126-127.   6. Y. B. Zamri, J. B. Shamsul and K. R. Ahmad (2006). Corrosion Behaviour of AA2014/15 vol. % Al2O3p and AA2009/20 vol. % SiCw in Salt Spray Test. In proceeding of National Metallurgy Conference 2006. pp. 123-125.   7. Y. B. Zamri, J. B. Shamsul and K. R. Ahmad (2006). Overview of Processing, Properties and Application on Aluminium Matrix Composites. In proceeding of National Metallurgy Conference 2006. pp. 130-131.   8. Y. B. Zamri, J. B. Shamsul and K. R. Ahmad (2006). Corrosion of Aluminium Matrix Compsites. In proceeding of National Metallurgy Conference 2006. pp. 128-129.   9. Zamri Yusoff, Shamsul baharin Jamaludin and Khairel Rafezi Ahmad (2006). The Effects of Ageing Condition on the Microstructure and Hardness of Al2009/SiCw and Al2014/Al2O3p. In Journal of Solid State Science and Technology Letters, vol. 13. No. 2 (suppl.) 2006. pp.165. 10. S. B. Jamaludin, Z. Yusoff, K.R. Ahmad (2008). Comparative study of corrosion of AA2014/15 vol% Al2O3p and AA2009/20 vol% SiCw. Portugaliae Electrochimica Acta, vol. 26, pp. 291-301. 11. Zamri Yusoff, Mohamad Ruslan Zai, Mohd Aiman, Mohd Syaiful, Mohd Syamil and Mohamad Khairul Rizuan (2009). PTSS Testing Equipment Status Analysis at Mecahnical Engineering Department for Fundamental Research Works of Material Engineering Field, in proceeding of Seminar Penyelidikan Pendidikan Zon 1, POLIMAS. pp. 105-111.   12. Zamri Yusoff, Shamsul baharin Jamaludin and Khairel Rafezi Ahmad (2009), Microstructure Evaluation on an Al2009 Reinforced with SiC whiskers and Al 2014 Reinforced with Al2O3p particles. PTSS Digest. pp. 45-62. ISSN 2180-2173.   13. Zamri Yusoff, Shamsul baharin Jamaludin and Khairel Rafezi Ahmad (2009), The Use of SEM and XRD to Evaluate the microstructure and Corrosion Porducts in AA2014/15 vol. % Al2O3p and AA2009/20 vol. % SiCw. PTSS Digest. pp. 63-72. ISSN 2180-2173.   14. Zamri Yusoff, Shamsul baharin Jamaludin and Misbahul Amin (2009), A Feasibility Study on Palm Shell Activated carbon as a Reinforcement in a Aluminium Matrix Composite Fabricated via Conventional Powder Metallurgy. PTSS Digest. pp. 73-85. ISSN 2180-2173.   15. Zamri Yusoff, Shamsul baharin Jamaludin and Misbahul Amin (2010), Correlation and Contribution of Synergic Factors on Abrasive Wear Behaviour of Slag/Aluminium Composite using Statistical analysis. In the proceeding of The 1st Regional Conference on Applied and Engineering Mathematics 2010, Lim Eng Aik, Qamar Nasir Usmani and Muhamad Nasaruddin (Eds.). Vol. 1, No. 28, pp. 168-171.   16. Zamri Yusoff, Shamsul baharin Jamaludin and Misbahul Amin (2010), A Developing a Mathematical Model to Evaluate Wear Coefficient of Aluminium/Slag Powder Metallurgy Composites. In the proceeding of The 1st Regional Conference on Applied and Engineering Mathematics 2010, Lim Eng Aik, Qamar Nasir Usmani and Muhamad Nasaruddin (Eds.). Vol. 4, No. 12, pp. 413-418.   17. Zamri Yusoff, Shamsul baharin Jamaludin and Misbahul Amin (2010), Two-body Abrasive Wear of Slag Reinforced Aluminium Matrix Composites, in proceedings of Malaysian Technical Universities Conference on Engineering and Technology 2010. pp. 163-166. ISBN 978-983-2948-77-3.   18. Zamri Yusoff and Shamsul baharin Jamaludin (2010), An Examination Of The Evidence Of Wear In The Wearing Process Of Aluminium Reinforced With Slag Particles Using SEM, in proceedings of International Postgraduate Conference on Engineering (IPCE) 2010.   19. Zamri Yusoff and Baharin Jamaludin (2010), Tribology and Wear Theory of Aluminium Composites:Review and Discussion, in proceedings of International Postgraduate Conference on Engineering (IPCE) 2010. 20. Zamri Yusoff, Shamsul Baharin Jamaludin, Misbahul Amin, and Nur Hidayah Ahmad Zaidi (2010), Sliding Wear Properties of Hybrid Aluminium Composite Reinforced By Particles of Palm Shell Activated Carbon and Slag, in Journal of Science and Technology, UTHM. Volume 2, No. 1, August 2010, pp. 79-96. ISSN: 1985-8809   21. Zamri Yusoff and Shamsul Baharin Jamaludin (2011), Tribology and Development of Wear Theory: Review and Discussion, in International Journal of Current Research and Review, Vol. 03, Issue 02, Feb 2011. pp 13-26. ISSN: 0975-5241 http://www.ijcrr.com/journals/vol%203%20issue%202.pdf   22. Zamri Yusoff and Shamsul Baharin Jamaludin (2011), Wear Behaviour of Palm Shell Activated Carbon and Slag Reinforced Aluminium Matrix Composite Fabricated Via Conventional Powder Metallurgy, in proceeding of 1st Sustainable Engineering Research Colloquium (SERC):Structural Materials Group and Electronic Materials Group.   23. Y. B. Zamri, J. B. Shamsul, M. M. Amin ( 2011). Potential of Palm Oil Clinker as Reinforcement in Aluminium Matrix Composite for Tribological Application. SInternational Journal of Mechanical and Materials Engineering (ISSN 1823-0334) Indexed by Scopus,6, No 1 http://ejum.fsktm.um.edu.my/ArticleInformation.aspx?ArticleID=1035   24. Y. Zamri, J. B. Shamsul (2011). Physical properties and wear behaviour of aluminium matrix composite reinforced with palm shell activated carbon (PSAC). Kovove Mater., 49, pp. 1-9.http://www.kovmat.sav.sk/abstract.php?rr=49&cc=4&ss=287   25. Zamri Yusoff (2010). An overview of the wear behaviour of SiC-reinforced and Al2O3 reinforced aluminium matrix composite: A comparative study. PTSS Digest 2010. pp. 119-131. ISSN 2180-2173.   26. Zamri Yusoff (2010). The roles of graphite in controlling wear behaviour of graphite reinforced aluminium composite and hybrid composite: An overview. PTSS Digest 2010. pp. 132-143. ISSN 2180-2173.   27. Y. Zamri and J. B. Shamsul (2011). Analysis of worn surfaces of palm shell activated carbon (PSAC) reinforced aluminium matrix composite. Engineering e-Transaction. Vol. 6, No.2, pp.164-168. ISSN 1823-6379.   28. Zamri Yusoff and Shamsul Baharin Jamaludin (2011). The influence of particle size and compaction pressure on surface hardness of aluminium composite fabricated via powder metallurgy. Australian Journal of Basic and Applied Sciences. Vol.5, issue 11, pp. 133-140.   29. Zamri Yusoff and Shamsul Baharin Jamaludin (2011). Analysis of worn surfaces of palm shell activated carbon (PSAC) reinforced aluminium matrix composite. in proceeding of Regional Tribology Conference, Bayview Hotel langkawi Island, Malaysia. Edited by M.A Maleque and A.A. Adebisi. pp. 252-257. ISBN 978-967-5878-47-3   30. Zamri Yusoff (2011). Fabrication and Characterization of Aluminium matrix Composite via Conventional Powder Metallurgy. RnD DoMe, Politeknik Kota Bharu, Kelantan. Vol. 1, No. 2, pp. 80-87. ISSN 2180-2238.   31. Zamri Yusoff (2012). The Physical and Wear properties of Hybrid Biomass By-product Particulates Reinforced Aluminium matrix composite. 8th International Conference on Marine Technology (MARTEC2012), Universiti Malaysia Terengganu. pp. 72. 32. Z. Yusoff, S. B. Jamaludin and M. Mohd Noor (2012). Physical Properties and Microstructures of Green Aluminium Matrix Composite. The 8th Asian-Australian Conference on Composite Materials (ACCM8), Kuala Lumpur Convention Centre, Malaysia. pp. 225. 33. M. N. Mazlee, J. B. Shamsul and Y. Zamri (2012). Fabrication and Dynamic Mechanical Properties of A357-Stainless Steel Composites.The 8th Asian-Australian Conference on Composite Materials (ACCM8), Kuala Lumpur Convention Centre, Malaysia. pp. 305.

CONSULTANCY WORK

EDITORIAL BOARD   1. Editorial Member, PTSS Digest.2009. 2. Editorial Member, PTSS Digest.2010. 3. Editorial Member, Journal Penyelidikan@pkb. 2011. 4. Editorial Member, RnD DoMe. Vol. 1, No. 2, 2011. 5. Editorial Member, RnD DoMe. Vol. 1, No. 1, 2012. 6. Author Member of the book, Preparing Project proposal, ISBN:978-983-3442-32-4

PROFESSIONAL BODY

Board of Engineer Malaysia

SPECIAL ACHIEVEMENTS / AWARDS

Accustomed with application software such as windows up-to date, experts in power point presentations, Microsoft excel, Auto Cad Software, SPSS, Adobe Photoshop, Internet Explorer, etc.

COMMUNITY SERVICE

As a judge at The 8th Asian-Australian Conference on Composite Materials (ACCM8), Kuala Lumpur Convention Centre, Kuala Lumpur on 6-8 Nov 2012 organized by Asian-Australian Composite Materials .   As a panel at The Seminar Pengajian Kolej Komuniti peringkat Zon Timur 2012 on 29 April 2012 organized by Kolej Komuniti Pasir Mas   As a panel at the Seminar Memperkasa Institusi Pengajian Tinggi Kolej Komuniti dan Politeknik Peringkat Negeri Kelantan on 17 December 2012 organized by Kolej Komuniti Kok Lanas   Design a Portable Water tank for TBDE SDN BHD, Tok bali, Semerak, Pasir Putih Kelantan on 4 Jun 2012 till  30 August 2012   As analyzer for up and down slip of boat at TBDE SDN BHD dock on 4 Jun 2012 till  30 August 2012   As Organizing Committee of Bengkel Penulisan Akademik 1/2012 JKM sesi Dis 2012 on 13-15 mac 2012 organized by ULPL, PKB.   Deliver a lecture on research methodology and technical writing in Bengkel Penulisan Akademik 1/2012 JKM sesi Dis 2012 on 13-15 mac 2012 organized by ULPL, PKB.   As a panel at The Bengkel Penulisan Akademik 1/2012 JKM sesi Dis 2012 on 13-15 mac 2012 organized by ULPL, PKB.

REFEREES

Engku Muhammad Bin Engku Ali                Head Department Of Mechanical Engineering                Jab. Kej. Mekanikal, Politeknik Kota Bharu, Kelantan               Contact No : 09-7889344 Ext: 181   Mohd Noor Bin Salleh               Lecturer Dh48               Jab. Kej. Mekanikal, Politeknik Kota Bharu, Kelantan               Contact No : 09-7889344 Ext: 182   Prof Dr. Shamsul Baharin  bin Jamaludin (UniMAP)             Lecturer             Material Engineering School             University of Malaysia Perlis (UniMAP)             Contact No: 019-4134777

CONTACT DETAILS

Address                        : Jabatan Kejuruteraan Mekanikal,                                          Politeknik Kota Bharu, Km 24 Kok Lanas, 16450 Ketereh, Kelantan Telephone No.               : 09-7889126/344/641 ext 196 Mobile No.                    : 012-6057182 Email                            : zamriyusoff@pkb.edu.my

PERSONAL PARTICULARS

Date of Birth                 :  02.03.1964 Nationality                     :  Malaysian Marital Status                :  Married Permanent Residence    :  Lot 35, Bel. Sek. Keb. Kubang Golok, Perupok,  16300 Bachok, Kelantan.

ACADEMIC QUALIFICATIONS

Qualification                  :  Doctor of Philosophy (PhD) Field of Study               :  Material Engineering Major                            :  Metal Matrix Composite/Powder Metallurgy/Wear Behaviour Institute/University         :  Universiti Malaysia Perlis Graduation Date            :  2012   Qualification                  :  Master of Science (M.Sc) Field of Study               :  Material Engineering Major                            :  Metal matrix Composite/Corrosion Institute/University         :  Universiti Malaysia Perlis Graduation Date            :  2007     Qualification                  :  Bachelor of Mechanical Engineering [B. Mech. Eng.(Hons.)] Field of Study               :  Mechanical Major                            :  Pure Mechanical Institute/University         :  Universiti Teknologi Malaysia Graduation Date            :  1988   Qualification                  :  Diploma in Education Field of Study               :  Engineering Education Major                            :  Engineering education Institute/University         :  Universiti Teknologi Malaysia Graduation Date            :  1992     Qualification                  :  Diploma in Polymer Engineering Field of Study               :  Termoplastic/Termoset Major                            :  Polymer Proccessing Institute/University         :  Trowbridge College, United Kingdom. Graduation Date            :  1997     Qualification                  :  Certificate in Advanced Welding Field of Study               :  TIG and MIG Major                            :  Welding of Aluminium and Steel Institute/University         :  Universiti Kuala Lumpur (UniKL) Graduation Date            :  2005

WORK EXPERIENCE

Organisation Position Title Duration Work Description:   Universiti Kebangsaan Malaysia Research Asistant 1988-1991 Assist the researcher under IRPA research Grant on topic “Thermoplastic natural Rubber” Kota Bharu Polytechnic       Lecturer   1992 – 2004 Courses Taught Teknologi Logam dan Bahan   Kawalan   Bengkel Kejuruteraan   Programs   Sijil jentera Am Sijil teknologi Pembuatan   Tuanku Syed Sirajuddin Perlis Polytechnic   Student Affair Officer 2004- 2011   Planning, implemeting dan monitoring student affair activities suc as Dicipline of students, Student representatives, Minggu Suai Kenal, and personal affair of student as well as counselling and carrier.   Kota Bharu Polytechnic   Lecturer   2011 – present Courses Taught  :         -          Maintenance management -          Engineering Laboratory 3 -          Engineering Workshop 4    Programs – Diploma in Mechanical Engineering               Work Description:                 Academic Responsibilities:   As Mechanical Lecturer   (Mechanical Dept.)   ·         Responsible for overall tutorial and teaching methods for mechanical subject involved, prepared                 teaching method for each semester intake. ·         Reporting to the department leaders on status, outstanding works and others problem of student              face. ·         Prepare standard of teaching methods by following government and international standard. (ISO              standard) ·         Prepare report regarding workshop that include additional responsible. ·         Attended every course, training involved with engineering skilled. ·         Prepare a paper work for marking system/format for workshop @ Labs. ·         Planning, implemeting dan monitoring teaching and learning of all courses taught.        Producing, editing and reviewing teaching material.        Assessing students’ academic progress – tests, quizzes, assignments and final exam.        Academic Adviser – providing guidance and advice to students.     Non-academic Responsibilities;   Co-ordinator for research and development, inovation and final project. Committee board in Minggu Suai Kenal (MSKJun2011) Committee in Konvokesyen 2013 Co-ordinator for Research methdology Workshop JKM Co-ordinator for SPSS training Workshop 2013-Level 1 JKM Co-ordinator for publication at JKM Co-ordinator for research activities including application of fund from PRGS and FRGS at JKM Panel of Judge for conferences in PKB

SKILLS / STRENGTHS

Proficient in spoken and written Malay and English. Able to teach students in Mechanical and Material Engineering. Able to do research activity and writing technical report and journal. Able to conduct the Statistical Data Analysis by using SPSS Able to do supervison for master and PhD student

CONFERENCES AND TRAINING

REFER APPENDIX

RESEARCH & PUBLICATIONS

1. Che Husna Azhari, Zamri Yusoff and Jaafar Sahari (1992). Preliminary Studies on the Morphology of Natural Rubber Polypropylene Blends using Scanning Electron Microscopy. Jurnal kejuruteraan (4), pp. 25-34. ISSN0128-0198 (http://myais.fsktm.um.edu.my/view/people/zamri_yusoff,_,html)   2. Zamri Yusoff, Shamsul baharin Jamaludin and Khairel Rafezi Ahmad (2006). Comparative Study of the Corrosion Behaviour of AA2014/15 vol. % Al2O3p and AA2009/20 vol. % SiCw After Artificial Ageing. KUKUM Engineering Research Seminar 2006. pp. 195-210. ISBN 978-983-42371-1-0.   3. Y. B. Zamri, J. B. Shamsul and K. R. Ahmad (2006). The Use of SEM and XRD to Evaluates the microstructure and Corrosion Porducts in AA2014/15 vol. % Al2O3p and AA2009/20 vol. % SiCw. In proceeding of The 15th Scientific Conference in Collaboration with 16th Annual General Meeting of Electron Microscopy Society of Malaysia. P.S. 2b4- ISBN-983-2888-41-7.   4. Zamri Yusoff, Shamsul baharin Jamaludin and Khairel Rafezi Ahmad (2006). Characterization of the Electrochemical Event at Corrosion Site on MMCs by XRD and EDS. In Proceeding of International Conference on X-Rays and Related Technologies in Research and Industry. ISBN-983-3391-90-7.   5. Y. B. Zamri, J. B. Shamsul and K. R. Ahmad (2006). Hardness and Resistivity Studies of AMCs after Artificial Ageing. In proceeding of National Metallurgy Conference 2006. pp. 126-127.   6. Y. B. Zamri, J. B. Shamsul and K. R. Ahmad (2006). Corrosion Behaviour of AA2014/15 vol. % Al2O3p and AA2009/20 vol. % SiCw in Salt Spray Test. In proceeding of National Metallurgy Conference 2006. pp. 123-125.   7. Y. B. Zamri, J. B. Shamsul and K. R. Ahmad (2006). Overview of Processing, Properties and Application on Aluminium Matrix Composites. In proceeding of National Metallurgy Conference 2006. pp. 130-131.   8. Y. B. Zamri, J. B. Shamsul and K. R. Ahmad (2006). Corrosion of Aluminium Matrix Compsites. In proceeding of National Metallurgy Conference 2006. pp. 128-129.   9. Zamri Yusoff, Shamsul baharin Jamaludin and Khairel Rafezi Ahmad (2006). The Effects of Ageing Condition on the Microstructure and Hardness of Al2009/SiCw and Al2014/Al2O3p. In Journal of Solid State Science and Technology Letters, vol. 13. No. 2 (suppl.) 2006. pp.165. 10. S. B. Jamaludin, Z. Yusoff, K.R. Ahmad (2008). Comparative study of corrosion of AA2014/15 vol% Al2O3p and AA2009/20 vol% SiCw. Portugaliae Electrochimica Acta, vol. 26, pp. 291-301. 11. Zamri Yusoff, Mohamad Ruslan Zai, Mohd Aiman, Mohd Syaiful, Mohd Syamil and Mohamad Khairul Rizuan (2009). PTSS Testing Equipment Status Analysis at Mecahnical Engineering Department for Fundamental Research Works of Material Engineering Field, in proceeding of Seminar Penyelidikan Pendidikan Zon 1, POLIMAS. pp. 105-111.   12. Zamri Yusoff, Shamsul baharin Jamaludin and Khairel Rafezi Ahmad (2009), Microstructure Evaluation on an Al2009 Reinforced with SiC whiskers and Al 2014 Reinforced with Al2O3p particles. PTSS Digest. pp. 45-62. ISSN 2180-2173.   13. Zamri Yusoff, Shamsul baharin Jamaludin and Khairel Rafezi Ahmad (2009), The Use of SEM and XRD to Evaluate the microstructure and Corrosion Porducts in AA2014/15 vol. % Al2O3p and AA2009/20 vol. % SiCw. PTSS Digest. pp. 63-72. ISSN 2180-2173.   14. Zamri Yusoff, Shamsul baharin Jamaludin and Misbahul Amin (2009), A Feasibility Study on Palm Shell Activated carbon as a Reinforcement in a Aluminium Matrix Composite Fabricated via Conventional Powder Metallurgy. PTSS Digest. pp. 73-85. ISSN 2180-2173.   15. Zamri Yusoff, Shamsul baharin Jamaludin and Misbahul Amin (2010), Correlation and Contribution of Synergic Factors on Abrasive Wear Behaviour of Slag/Aluminium Composite using Statistical analysis. In the proceeding of The 1st Regional Conference on Applied and Engineering Mathematics 2010, Lim Eng Aik, Qamar Nasir Usmani and Muhamad Nasaruddin (Eds.). Vol. 1, No. 28, pp. 168-171.   16. Zamri Yusoff, Shamsul baharin Jamaludin and Misbahul Amin (2010), A Developing a Mathematical Model to Evaluate Wear Coefficient of Aluminium/Slag Powder Metallurgy Composites. In the proceeding of The 1st Regional Conference on Applied and Engineering Mathematics 2010, Lim Eng Aik, Qamar Nasir Usmani and Muhamad Nasaruddin (Eds.). Vol. 4, No. 12, pp. 413-418.   17. Zamri Yusoff, Shamsul baharin Jamaludin and Misbahul Amin (2010), Two-body Abrasive Wear of Slag Reinforced Aluminium Matrix Composites, in proceedings of Malaysian Technical Universities Conference on Engineering and Technology 2010. pp. 163-166. ISBN 978-983-2948-77-3.   18. Zamri Yusoff and Shamsul baharin Jamaludin (2010), An Examination Of The Evidence Of Wear In The Wearing Process Of Aluminium Reinforced With Slag Particles Using SEM, in proceedings of International Postgraduate Conference on Engineering (IPCE) 2010.   19. Zamri Yusoff and Baharin Jamaludin (2010), Tribology and Wear Theory of Aluminium Composites:Review and Discussion, in proceedings of International Postgraduate Conference on Engineering (IPCE) 2010. 20. Zamri Yusoff, Shamsul Baharin Jamaludin, Misbahul Amin, and Nur Hidayah Ahmad Zaidi (2010), Sliding Wear Properties of Hybrid Aluminium Composite Reinforced By Particles of Palm Shell Activated Carbon and Slag, in Journal of Science and Technology, UTHM. Volume 2, No. 1, August 2010, pp. 79-96. ISSN: 1985-8809   21. Zamri Yusoff and Shamsul Baharin Jamaludin (2011), Tribology and Development of Wear Theory: Review and Discussion, in International Journal of Current Research and Review, Vol. 03, Issue 02, Feb 2011. pp 13-26. ISSN: 0975-5241 http://www.ijcrr.com/journals/vol%203%20issue%202.pdf   22. Zamri Yusoff and Shamsul Baharin Jamaludin (2011), Wear Behaviour of Palm Shell Activated Carbon and Slag Reinforced Aluminium Matrix Composite Fabricated Via Conventional Powder Metallurgy, in proceeding of 1st Sustainable Engineering Research Colloquium (SERC):Structural Materials Group and Electronic Materials Group.   23. Y. B. Zamri, J. B. Shamsul, M. M. Amin ( 2011). Potential of Palm Oil Clinker as Reinforcement in Aluminium Matrix Composite for Tribological Application. SInternational Journal of Mechanical and Materials Engineering (ISSN 1823-0334) Indexed by Scopus,6, No 1 http://ejum.fsktm.um.edu.my/ArticleInformation.aspx?ArticleID=1035   24. Y. Zamri, J. B. Shamsul (2011). Physical properties and wear behaviour of aluminium matrix composite reinforced with palm shell activated carbon (PSAC). Kovove Mater., 49, pp. 1-9.http://www.kovmat.sav.sk/abstract.php?rr=49&cc=4&ss=287   25. Zamri Yusoff (2010). An overview of the wear behaviour of SiC-reinforced and Al2O3 reinforced aluminium matrix composite: A comparative study. PTSS Digest 2010. pp. 119-131. ISSN 2180-2173.   26. Zamri Yusoff (2010). The roles of graphite in controlling wear behaviour of graphite reinforced aluminium composite and hybrid composite: An overview. PTSS Digest 2010. pp. 132-143. ISSN 2180-2173.   27. Y. Zamri and J. B. Shamsul (2011). Analysis of worn surfaces of palm shell activated carbon (PSAC) reinforced aluminium matrix composite. Engineering e-Transaction. Vol. 6, No.2, pp.164-168. ISSN 1823-6379.   28. Zamri Yusoff and Shamsul Baharin Jamaludin (2011). The influence of particle size and compaction pressure on surface hardness of aluminium composite fabricated via powder metallurgy. Australian Journal of Basic and Applied Sciences. Vol.5, issue 11, pp. 133-140.   29. Zamri Yusoff and Shamsul Baharin Jamaludin (2011). Analysis of worn surfaces of palm shell activated carbon (PSAC) reinforced aluminium matrix composite. in proceeding of Regional Tribology Conference, Bayview Hotel langkawi Island, Malaysia. Edited by M.A Maleque and A.A. Adebisi. pp. 252-257. ISBN 978-967-5878-47-3   30. Zamri Yusoff (2011). Fabrication and Characterization of Aluminium matrix Composite via Conventional Powder Metallurgy. RnD DoMe, Politeknik Kota Bharu, Kelantan. Vol. 1, No. 2, pp. 80-87. ISSN 2180-2238.   31. Zamri Yusoff (2012). The Physical and Wear properties of Hybrid Biomass By-product Particulates Reinforced Aluminium matrix composite. 8th International Conference on Marine Technology (MARTEC2012), Universiti Malaysia Terengganu. pp. 72. 32. Z. Yusoff, S. B. Jamaludin and M. Mohd Noor (2012). Physical Properties and Microstructures of Green Aluminium Matrix Composite. The 8th Asian-Australian Conference on Composite Materials (ACCM8), Kuala Lumpur Convention Centre, Malaysia. pp. 225. 33. M. N. Mazlee, J. B. Shamsul and Y. Zamri (2012). Fabrication and Dynamic Mechanical Properties of A357-Stainless Steel Composites.The 8th Asian-Australian Conference on Composite Materials (ACCM8), Kuala Lumpur Convention Centre, Malaysia. pp. 305.

CONSULTANCY WORK

EDITORIAL BOARD   1. Editorial Member, PTSS Digest.2009. 2. Editorial Member, PTSS Digest.2010. 3. Editorial Member, Journal Penyelidikan@pkb. 2011. 4. Editorial Member, RnD DoMe. Vol. 1, No. 2, 2011. 5. Editorial Member, RnD DoMe. Vol. 1, No. 1, 2012. 6. Author Member of the book, Preparing Project proposal, ISBN:978-983-3442-32-4

PROFESSIONAL BODY

Board of Engineer Malaysia

SPECIAL ACHIEVEMENTS / AWARDS

Accustomed with application software such as windows up-to date, experts in power point presentations, Microsoft excel, Auto Cad Software, SPSS, Adobe Photoshop, Internet Explorer, etc.

COMMUNITY SERVICE

As a judge at The 8th Asian-Australian Conference on Composite Materials (ACCM8), Kuala Lumpur Convention Centre, Kuala Lumpur on 6-8 Nov 2012 organized by Asian-Australian Composite Materials .   As a panel at The Seminar Pengajian Kolej Komuniti peringkat Zon Timur 2012 on 29 April 2012 organized by Kolej Komuniti Pasir Mas   As a panel at the Seminar Memperkasa Institusi Pengajian Tinggi Kolej Komuniti dan Politeknik Peringkat Negeri Kelantan on 17 December 2012 organized by Kolej Komuniti Kok Lanas   Design a Portable Water tank for TBDE SDN BHD, Tok bali, Semerak, Pasir Putih Kelantan on 4 Jun 2012 till  30 August 2012   As analyzer for up and down slip of boat at TBDE SDN BHD dock on 4 Jun 2012 till  30 August 2012   As Organizing Committee of Bengkel Penulisan Akademik 1/2012 JKM sesi Dis 2012 on 13-15 mac 2012 organized by ULPL, PKB.   Deliver a lecture on research methodology and technical writing in Bengkel Penulisan Akademik 1/2012 JKM sesi Dis 2012 on 13-15 mac 2012 organized by ULPL, PKB.   As a panel at The Bengkel Penulisan Akademik 1/2012 JKM sesi Dis 2012 on 13-15 mac 2012 organized by ULPL, PKB.

REFEREES

Engku Muhammad Bin Engku Ali                Head Department Of Mechanical Engineering                Jab. Kej. Mekanikal, Politeknik Kota Bharu, Kelantan               Contact No : 09-7889344 Ext: 181   Mohd Noor Bin Salleh               Lecturer Dh48               Jab. Kej. Mekanikal, Politeknik Kota Bharu, Kelantan               Contact No : 09-7889344 Ext: 182   Prof Dr. Shamsul Baharin  bin Jamaludin (UniMAP)             Lecturer             Material Engineering School             University of Malaysia Perlis (UniMAP)             Contact No: 019-4134777

CONTACT DETAILS

Address                        : Jabatan Kejuruteraan Mekanikal,                                          Politeknik Kota Bharu, Km 24 Kok Lanas, 16450 Ketereh, Kelantan Telephone No.               : 09-7889126/344/641 ext 196 Mobile No.                    : 012-6057182 Email                            : zamriyusoff@pkb.edu.my

PERSONAL PARTICULARS

Date of Birth                 :  02.03.1964 Nationality                     :  Malaysian Marital Status                :  Married Permanent Residence    :  Lot 35, Bel. Sek. Keb. Kubang Golok, Perupok,  16300 Bachok, Kelantan.

ACADEMIC QUALIFICATIONS

Qualification                  :  Doctor of Philosophy (PhD) Field of Study               :  Material Engineering Major                            :  Metal Matrix Composite/Powder Metallurgy/Wear Behaviour Institute/University         :  Universiti Malaysia Perlis Graduation Date            :  2012   Qualification                  :  Master of Science (M.Sc) Field of Study               :  Material Engineering Major                            :  Metal matrix Composite/Corrosion Institute/University         :  Universiti Malaysia Perlis Graduation Date            :  2007     Qualification                  :  Bachelor of Mechanical Engineering [B. Mech. Eng.(Hons.)] Field of Study               :  Mechanical Major                            :  Pure Mechanical Institute/University         :  Universiti Teknologi Malaysia Graduation Date            :  1988   Qualification                  :  Diploma in Education Field of Study               :  Engineering Education Major                            :  Engineering education Institute/University         :  Universiti Teknologi Malaysia Graduation Date            :  1992     Qualification                  :  Diploma in Polymer Engineering Field of Study               :  Termoplastic/Termoset Major                            :  Polymer Proccessing Institute/University         :  Trowbridge College, United Kingdom. Graduation Date            :  1997     Qualification                  :  Certificate in Advanced Welding Field of Study               :  TIG and MIG Major                            :  Welding of Aluminium and Steel Institute/University         :  Universiti Kuala Lumpur (UniKL) Graduation Date            :  2005

WORK EXPERIENCE

Organisation Position Title Duration Work Description:   Universiti Kebangsaan Malaysia Research Asistant 1988-1991 Assist the researcher under IRPA research Grant on topic “Thermoplastic natural Rubber” Kota Bharu Polytechnic       Lecturer   1992 – 2004 Courses Taught Teknologi Logam dan Bahan   Kawalan   Bengkel Kejuruteraan   Programs   Sijil jentera Am Sijil teknologi Pembuatan   Tuanku Syed Sirajuddin Perlis Polytechnic   Student Affair Officer 2004- 2011   Planning, implemeting dan monitoring student affair activities suc as Dicipline of students, Student representatives, Minggu Suai Kenal, and personal affair of student as well as counselling and carrier.   Kota Bharu Polytechnic   Lecturer   2011 – present Courses Taught  :         -          Maintenance management -          Engineering Laboratory 3 -          Engineering Workshop 4    Programs – Diploma in Mechanical Engineering               Work Description:                 Academic Responsibilities:   As Mechanical Lecturer   (Mechanical Dept.)   ·         Responsible for overall tutorial and teaching methods for mechanical subject involved, prepared                 teaching method for each semester intake. ·         Reporting to the department leaders on status, outstanding works and others problem of student              face. ·         Prepare standard of teaching methods by following government and international standard. (ISO              standard) ·         Prepare report regarding workshop that include additional responsible. ·         Attended every course, training involved with engineering skilled. ·         Prepare a paper work for marking system/format for workshop @ Labs. ·         Planning, implemeting dan monitoring teaching and learning of all courses taught.        Producing, editing and reviewing teaching material.        Assessing students’ academic progress – tests, quizzes, assignments and final exam.        Academic Adviser – providing guidance and advice to students.     Non-academic Responsibilities;   Co-ordinator for research and development, inovation and final project. Committee board in Minggu Suai Kenal (MSKJun2011) Committee in Konvokesyen 2013 Co-ordinator for Research methdology Workshop JKM Co-ordinator for SPSS training Workshop 2013-Level 1 JKM Co-ordinator for publication at JKM Co-ordinator for research activities including application of fund from PRGS and FRGS at JKM Panel of Judge for conferences in PKB

SKILLS / STRENGTHS

Proficient in spoken and written Malay and English. Able to teach students in Mechanical and Material Engineering. Able to do research activity and writing technical report and journal. Able to conduct the Statistical Data Analysis by using SPSS Able to do supervison for master and PhD student

CONFERENCES AND TRAINING

REFER APPENDIX

RESEARCH & PUBLICATIONS

1. Che Husna Azhari, Zamri Yusoff and Jaafar Sahari (1992). Preliminary Studies on the Morphology of Natural Rubber Polypropylene Blends using Scanning Electron Microscopy. Jurnal kejuruteraan (4), pp. 25-34. ISSN0128-0198 (http://myais.fsktm.um.edu.my/view/people/zamri_yusoff,_,html)   2. Zamri Yusoff, Shamsul baharin Jamaludin and Khairel Rafezi Ahmad (2006). Comparative Study of the Corrosion Behaviour of AA2014/15 vol. % Al2O3p and AA2009/20 vol. % SiCw After Artificial Ageing. KUKUM Engineering Research Seminar 2006. pp. 195-210. ISBN 978-983-42371-1-0.   3. Y. B. Zamri, J. B. Shamsul and K. R. Ahmad (2006). The Use of SEM and XRD to Evaluates the microstructure and Corrosion Porducts in AA2014/15 vol. % Al2O3p and AA2009/20 vol. % SiCw. In proceeding of The 15th Scientific Conference in Collaboration with 16th Annual General Meeting of Electron Microscopy Society of Malaysia. P.S. 2b4- ISBN-983-2888-41-7.   4. Zamri Yusoff, Shamsul baharin Jamaludin and Khairel Rafezi Ahmad (2006). Characterization of the Electrochemical Event at Corrosion Site on MMCs by XRD and EDS. In Proceeding of International Conference on X-Rays and Related Technologies in Research and Industry. ISBN-983-3391-90-7.   5. Y. B. Zamri, J. B. Shamsul and K. R. Ahmad (2006). Hardness and Resistivity Studies of AMCs after Artificial Ageing. In proceeding of National Metallurgy Conference 2006. pp. 126-127.   6. Y. B. Zamri, J. B. Shamsul and K. R. Ahmad (2006). Corrosion Behaviour of AA2014/15 vol. % Al2O3p and AA2009/20 vol. % SiCw in Salt Spray Test. In proceeding of National Metallurgy Conference 2006. pp. 123-125.   7. Y. B. Zamri, J. B. Shamsul and K. R. Ahmad (2006). Overview of Processing, Properties and Application on Aluminium Matrix Composites. In proceeding of National Metallurgy Conference 2006. pp. 130-131.   8. Y. B. Zamri, J. B. Shamsul and K. R. Ahmad (2006). Corrosion of Aluminium Matrix Compsites. In proceeding of National Metallurgy Conference 2006. pp. 128-129.   9. Zamri Yusoff, Shamsul baharin Jamaludin and Khairel Rafezi Ahmad (2006). The Effects of Ageing Condition on the Microstructure and Hardness of Al2009/SiCw and Al2014/Al2O3p. In Journal of Solid State Science and Technology Letters, vol. 13. No. 2 (suppl.) 2006. pp.165. 10. S. B. Jamaludin, Z. Yusoff, K.R. Ahmad (2008). Comparative study of corrosion of AA2014/15 vol% Al2O3p and AA2009/20 vol% SiCw. Portugaliae Electrochimica Acta, vol. 26, pp. 291-301. 11. Zamri Yusoff, Mohamad Ruslan Zai, Mohd Aiman, Mohd Syaiful, Mohd Syamil and Mohamad Khairul Rizuan (2009). PTSS Testing Equipment Status Analysis at Mecahnical Engineering Department for Fundamental Research Works of Material Engineering Field, in proceeding of Seminar Penyelidikan Pendidikan Zon 1, POLIMAS. pp. 105-111.   12. Zamri Yusoff, Shamsul baharin Jamaludin and Khairel Rafezi Ahmad (2009), Microstructure Evaluation on an Al2009 Reinforced with SiC whiskers and Al 2014 Reinforced with Al2O3p particles. PTSS Digest. pp. 45-62. ISSN 2180-2173.   13. Zamri Yusoff, Shamsul baharin Jamaludin and Khairel Rafezi Ahmad (2009), The Use of SEM and XRD to Evaluate the microstructure and Corrosion Porducts in AA2014/15 vol. % Al2O3p and AA2009/20 vol. % SiCw. PTSS Digest. pp. 63-72. ISSN 2180-2173.   14. Zamri Yusoff, Shamsul baharin Jamaludin and Misbahul Amin (2009), A Feasibility Study on Palm Shell Activated carbon as a Reinforcement in a Aluminium Matrix Composite Fabricated via Conventional Powder Metallurgy. PTSS Digest. pp. 73-85. ISSN 2180-2173.   15. Zamri Yusoff, Shamsul baharin Jamaludin and Misbahul Amin (2010), Correlation and Contribution of Synergic Factors on Abrasive Wear Behaviour of Slag/Aluminium Composite using Statistical analysis. In the proceeding of The 1st Regional Conference on Applied and Engineering Mathematics 2010, Lim Eng Aik, Qamar Nasir Usmani and Muhamad Nasaruddin (Eds.). Vol. 1, No. 28, pp. 168-171.   16. Zamri Yusoff, Shamsul baharin Jamaludin and Misbahul Amin (2010), A Developing a Mathematical Model to Evaluate Wear Coefficient of Aluminium/Slag Powder Metallurgy Composites. In the proceeding of The 1st Regional Conference on Applied and Engineering Mathematics 2010, Lim Eng Aik, Qamar Nasir Usmani and Muhamad Nasaruddin (Eds.). Vol. 4, No. 12, pp. 413-418.   17. Zamri Yusoff, Shamsul baharin Jamaludin and Misbahul Amin (2010), Two-body Abrasive Wear of Slag Reinforced Aluminium Matrix Composites, in proceedings of Malaysian Technical Universities Conference on Engineering and Technology 2010. pp. 163-166. ISBN 978-983-2948-77-3.   18. Zamri Yusoff and Shamsul baharin Jamaludin (2010), An Examination Of The Evidence Of Wear In The Wearing Process Of Aluminium Reinforced With Slag Particles Using SEM, in proceedings of International Postgraduate Conference on Engineering (IPCE) 2010.   19. Zamri Yusoff and Baharin Jamaludin (2010), Tribology and Wear Theory of Aluminium Composites:Review and Discussion, in proceedings of International Postgraduate Conference on Engineering (IPCE) 2010. 20. Zamri Yusoff, Shamsul Baharin Jamaludin, Misbahul Amin, and Nur Hidayah Ahmad Zaidi (2010), Sliding Wear Properties of Hybrid Aluminium Composite Reinforced By Particles of Palm Shell Activated Carbon and Slag, in Journal of Science and Technology, UTHM. Volume 2, No. 1, August 2010, pp. 79-96. ISSN: 1985-8809   21. Zamri Yusoff and Shamsul Baharin Jamaludin (2011), Tribology and Development of Wear Theory: Review and Discussion, in International Journal of Current Research and Review, Vol. 03, Issue 02, Feb 2011. pp 13-26. ISSN: 0975-5241 http://www.ijcrr.com/journals/vol%203%20issue%202.pdf   22. Zamri Yusoff and Shamsul Baharin Jamaludin (2011), Wear Behaviour of Palm Shell Activated Carbon and Slag Reinforced Aluminium Matrix Composite Fabricated Via Conventional Powder Metallurgy, in proceeding of 1st Sustainable Engineering Research Colloquium (SERC):Structural Materials Group and Electronic Materials Group.   23. Y. B. Zamri, J. B. Shamsul, M. M. Amin ( 2011). Potential of Palm Oil Clinker as Reinforcement in Aluminium Matrix Composite for Tribological Application. SInternational Journal of Mechanical and Materials Engineering (ISSN 1823-0334) Indexed by Scopus,6, No 1 http://ejum.fsktm.um.edu.my/ArticleInformation.aspx?ArticleID=1035   24. Y. Zamri, J. B. Shamsul (2011). Physical properties and wear behaviour of aluminium matrix composite reinforced with palm shell activated carbon (PSAC). Kovove Mater., 49, pp. 1-9.http://www.kovmat.sav.sk/abstract.php?rr=49&cc=4&ss=287   25. Zamri Yusoff (2010). An overview of the wear behaviour of SiC-reinforced and Al2O3 reinforced aluminium matrix composite: A comparative study. PTSS Digest 2010. pp. 119-131. ISSN 2180-2173.   26. Zamri Yusoff (2010). The roles of graphite in controlling wear behaviour of graphite reinforced aluminium composite and hybrid composite: An overview. PTSS Digest 2010. pp. 132-143. ISSN 2180-2173.   27. Y. Zamri and J. B. Shamsul (2011). Analysis of worn surfaces of palm shell activated carbon (PSAC) reinforced aluminium matrix composite. Engineering e-Transaction. Vol. 6, No.2, pp.164-168. ISSN 1823-6379.   28. Zamri Yusoff and Shamsul Baharin Jamaludin (2011). The influence of particle size and compaction pressure on surface hardness of aluminium composite fabricated via powder metallurgy. Australian Journal of Basic and Applied Sciences. Vol.5, issue 11, pp. 133-140.   29. Zamri Yusoff and Shamsul Baharin Jamaludin (2011). Analysis of worn surfaces of palm shell activated carbon (PSAC) reinforced aluminium matrix composite. in proceeding of Regional Tribology Conference, Bayview Hotel langkawi Island, Malaysia. Edited by M.A Maleque and A.A. Adebisi. pp. 252-257. ISBN 978-967-5878-47-3   30. Zamri Yusoff (2011). Fabrication and Characterization of Aluminium matrix Composite via Conventional Powder Metallurgy. RnD DoMe, Politeknik Kota Bharu, Kelantan. Vol. 1, No. 2, pp. 80-87. ISSN 2180-2238.   31. Zamri Yusoff (2012). The Physical and Wear properties of Hybrid Biomass By-product Particulates Reinforced Aluminium matrix composite. 8th International Conference on Marine Technology (MARTEC2012), Universiti Malaysia Terengganu. pp. 72. 32. Z. Yusoff, S. B. Jamaludin and M. Mohd Noor (2012). Physical Properties and Microstructures of Green Aluminium Matrix Composite. The 8th Asian-Australian Conference on Composite Materials (ACCM8), Kuala Lumpur Convention Centre, Malaysia. pp. 225. 33. M. N. Mazlee, J. B. Shamsul and Y. Zamri (2012). Fabrication and Dynamic Mechanical Properties of A357-Stainless Steel Composites.The 8th Asian-Australian Conference on Composite Materials (ACCM8), Kuala Lumpur Convention Centre, Malaysia. pp. 305.

CONSULTANCY WORK

EDITORIAL BOARD   1. Editorial Member, PTSS Digest.2009. 2. Editorial Member, PTSS Digest.2010. 3. Editorial Member, Journal Penyelidikan@pkb. 2011. 4. Editorial Member, RnD DoMe. Vol. 1, No. 2, 2011. 5. Editorial Member, RnD DoMe. Vol. 1, No. 1, 2012. 6. Author Member of the book, Preparing Project proposal, ISBN:978-983-3442-32-4

PROFESSIONAL BODY

Board of Engineer Malaysia

SPECIAL ACHIEVEMENTS / AWARDS

Accustomed with application software such as windows up-to date, experts in power point presentations, Microsoft excel, Auto Cad Software, SPSS, Adobe Photoshop, Internet Explorer, etc.

COMMUNITY SERVICE

As a judge at The 8th Asian-Australian Conference on Composite Materials (ACCM8), Kuala Lumpur Convention Centre, Kuala Lumpur on 6-8 Nov 2012 organized by Asian-Australian Composite Materials .   As a panel at The Seminar Pengajian Kolej Komuniti peringkat Zon Timur 2012 on 29 April 2012 organized by Kolej Komuniti Pasir Mas   As a panel at the Seminar Memperkasa Institusi Pengajian Tinggi Kolej Komuniti dan Politeknik Peringkat Negeri Kelantan on 17 December 2012 organized by Kolej Komuniti Kok Lanas   Design a Portable Water tank for TBDE SDN BHD, Tok bali, Semerak, Pasir Putih Kelantan on 4 Jun 2012 till  30 August 2012   As analyzer for up and down slip of boat at TBDE SDN BHD dock on 4 Jun 2012 till  30 August 2012   As Organizing Committee of Bengkel Penulisan Akademik 1/2012 JKM sesi Dis 2012 on 13-15 mac 2012 organized by ULPL, PKB.   Deliver a lecture on research methodology and technical writing in Bengkel Penulisan Akademik 1/2012 JKM sesi Dis 2012 on 13-15 mac 2012 organized by ULPL, PKB.   As a panel at The Bengkel Penulisan Akademik 1/2012 JKM sesi Dis 2012 on 13-15 mac 2012 organized by ULPL, PKB.

REFEREES

Engku Muhammad Bin Engku Ali                Head Department Of Mechanical Engineering                Jab. Kej. Mekanikal, Politeknik Kota Bharu, Kelantan               Contact No : 09-7889344 Ext: 181   Mohd Noor Bin Salleh               Lecturer Dh48               Jab. Kej. Mekanikal, Politeknik Kota Bharu, Kelantan               Contact No : 09-7889344 Ext: 182   Prof Dr. Shamsul Baharin  bin Jamaludin (UniMAP)             Lecturer             Material Engineering School             University of Malaysia Perlis (UniMAP)             Contact No: 019-4134777